Chords sound almost subsonic with lower tunings, but balance nicely with the crunchy treble, keeping everything well defined. The Invader delivers the thickest, deepest low-end response of any passive pickup we make. The ceramic magnets add depth and clarity while the large hex caps deliver smooth string-to-string balance.

These unique pole pieces expand the overall magnetic field and widen the frequency spectrum, which is why every note played through an Invader sounds so rich and massive. The Invader’s power comes from the combination of specially overwound coils, three large ceramic magnets, and its striking, oversized metal oxide pole pieces. No matter how dangerous your stock pickup claims to sound, the Invader will transform your guitar into the mean, heavy-sounding beast you always knew it could be.

Installing an Invader changes your guitar’s DNA. Output – The overall output of a passive pickup is influenced by several design factors: number of turns of wire on the coil(s), strength of the magnet, coil geometry and magnetic circuit geometry.The output of an active pickup is influenced by the same factors but is predominantly determined by the design of the onboard preamp. Looking at this from another point of view, ceramic magnets can be said to produce increased clarity, better note definition and faster response to picking. It is for this reason that many consider ceramic magnets to have a brittle sound, not their gauss strength. This has the effect of decreasing the inductance of the pickup and significantly raising the resonant frequency. The magnets at the lower end of the scale tend to produce a softer attack and a degree of “bloom” to the envelope of the note.Ĭeramic magnets should be considered as an individual case because they do not contain any nickel or iron. As the gauss strength goes up, so does the output. From there in order of ascending strength you have A2, A4, A5, A6, Ceramic and A8. Of the magnets we use, Alnico 3 has the lowest gauss strength. In the case of pickups, the most significant characteristic is the gauss strength, which is a measure of the density of the magnetic field. Magnet – We use several different magnet formulations: Alnico 2, Alnico 3, Alnico 4, Alnico 5, Alnico 6, Alnico 8 and Ceramic 5/8. DCR is often used as a gauge of output because as the turns increase, so does the output, though magnet type and the coil geometry also influence output. The length of the coil form, the number of turns and the gauge of wire all affect the DCR reading. DCR – Short for DC Resistance, is measured in Ohms and is the total resistance of the copper wire wound around a coil form.

Best real bass presets for zebra 2